Huawei CX600‑X3 Full Product Description
Product Overview
The Huawei CX600‑X3 is a compact carrier‑grade metro service platform (IP‑RAN convergence router) of CX600 series, deployed at metro aggregation layer for mobile bearer and FMC multi‑service transport networksHuawei Car.... Adopting centralized routing engine plus distributed line‑rate forwarding architecture and running Huawei VRP operating system, the 5U rack‑mount chassis provides abundant LPU service slots. It cooperates with ATN series access routers to deliver end‑to‑end bearer for 2G/3G/4G/5G mobile backhaul, enterprise leased‑line aggregation and metropolitan VPN services, supporting smooth evolution toward SR‑MPLS, SRv6 and FlexE slicing for 5G transport scenariosHuawei Car....
Key Features
-
Carrier‑grade high‑reliability design: 1+1 hot‑swap SRU main‑control redundancy, redundant SFU switching fabric, multi‑redundant power supply and hot‑swappable fan trays and service line‑cards. Supports ISSU in‑service upgrade, GR/NSR/NSF, hardware‑accelerated BFD, realizing 99.999% carrier‑class availability for mission‑critical metropolitan bearer networks.
-
Flexible modular interface expansion: Supports GE, 10GE SFP+, 25GE SFP28, 50GE, 100GE QSFP28 and legacy TDM interface boards. Meets mixed service requirements from existing mobile services to high‑bandwidth 5G backhaul traffic.
-
Comprehensive transport & routing feature set: Natively supports MPLS‑TP, LDP, RSVP‑TE, VLL, VPLS, L2VPN / L3VPN, EVPN, SR‑MPLS and SRv6. Complete Layer2/Layer3 protocol stack including OSPF, IS‑IS, BGP, IPv4/IPv6 dual‑stack, multicast protocols and RRPP. Built‑in FlexE flexible Ethernet provides hard‑isolation slicing for differentiated service bearer.
-
High‑precision synchronization capability: Supports Synchronous Ethernet, full‑mode IEEE 1588v2 PTP (OC/BC/TC), G.8275.1 and ACR adaptive clock recovery, satisfying strict frequency and time synchronization requirements for 5G base‑station backhaul.
-
Hardware‑accelerated OAM & fast protection: Supports Y.1731, TWAMP, RFC2544 for performance monitoring; supports IP FRR, LDP FRR, TE FRR and PW redundancy to achieve sub‑50 ms service switch‑over upon network failure.
-
Hierarchical QoS for SLA guarantee: Implements multi‑level HQoS, traffic policing, shaping and sophisticated queue scheduling, delivering differentiated bandwidth guarantee for mobile backhaul and high‑value enterprise private‑line services.
-
Intelligent unified O&M: Supports NETCONF/YANG, Telemetry streaming telemetry, remote batch deployment and performance statistics, compatible with Huawei iMaster NCE to simplify O&M for large‑scale metropolitan transport networks.
Technical Specifications
-
Form Factor: 5U height, 19‑inch standard rack‑mount chassis
-
Chassis Slots: 8×LPU service line‑card slots, 2×SRU main‑control slots, redundant SFU switching fabric slots
-
Switching Capacity: Up to 640 Gbit/s
-
Power Supply: Supports ‑48V DC or 220V AC power input with redundant configuration
-
Hot‑swappable Components: SRU main‑control, SFU switching fabric, power modules, fan trays, service LPUs
-
Supported Interfaces (board‑dependent): GE, 10GE SFP+, 25GE SFP28, 50GE, 100GE QSFP28, TDM interfaces
-
Supported Protocols: IPv4/IPv6, OSPF, IS‑IS, BGP; MPLS‑TP, SR‑MPLS, SRv6, EVPN, FlexE; SyncE, 1588v2 PTP; Y.1731, BFD
-
Operating Environment: 0 °C ~ +45 °C, relative humidity 5%‑95% non‑condensing, IP20 protection rating
-
Operating System: Huawei VRP
Application Scenarios
Mainly deployed as metro aggregation nodes in IP‑RAN mobile bearer networks, for 2G/3G/4G/5G base‑station backhaul aggregation, metropolitan enterprise leased‑line convergence and FMC converged service bearer. Ideal for medium‑scale operator metropolitan transport networks requiring carrier‑grade reliability and 5G‑oriented packet transport capabilitiesHuawei Car....
Short Version (for BOM / quotation list)
Huawei CX600‑X3, Carrier‑Grade 5U Metro Service Platform for IP‑RAN Aggregation, 19‑inch rack‑mount chassis, 8 LPU service slots, 1+1 redundant SRU & switching fabric, support GE/10GE/25GE/50GE/100GE interfaces, MPLS‑TP, SR‑MPLS, SRv6, EVPN, FlexE slicing, full‑mode 1588v2 & Synchronous Ethernet, sub‑50ms FRR protection, hardware OAM, for mobile backhaul and enterprise private‑line aggregation.
|
