Full Official English Description – Cisco Catalyst C9300L-24P-4G-E

1. Product Overview

2. Port Hardware Specifications

• Downlink Copper Ports: 24 × 10/100/1000BASE-T RJ45 ports with IEEE 802.3at PoE+ capability, auto-MDI/MDIX and auto-speed negotiation; each port supplies up to 30W DC power for VoIP phones, Wi-Fi APs and low-power IP cameras
• Fixed Integrated Uplinks: 4 built-in Gigabit SFP slots, compatible with 1000BASE-SX, LX, ZX, BiDi and CWDM SFP transceivers for multi-mode and long-distance single-mode fiber upstream links
• Stacking Interfaces: Dedicated rear StackWise-320 stacking ports delivering 320 Gbps bidirectional stacking bandwidth; supports stacking of up to 8 physical switches consolidated into a single logical switching domain (separate stacking cable kit required)
• Management Interfaces:
  1 × RJ45 serial console port, 1 × USB Type-A console port
  1 × 1G out-of-band management Ethernet port
  1 × USB 3.0 storage port for offline firmware upgrades, log export and local configuration backup
• Onboard Memory & Storage: 8 GB DDR4 DRAM, 16 GB internal flash memory

3. Switching & Forwarding Performance

• Standalone Full-Duplex Switching Capacity: 56 Gbps
• Standalone Line-Rate Forwarding Rate: 41.66 Mpps
• Aggregated Full Stack Bandwidth: Up to 376 Gbps
• Stack Aggregated Forwarding Throughput: 279.76 Mpps
• MAC Address Table Capacity: 32,000 MAC forwarding entries
• IPv4 Routing Table: 32,000 route entries
• IPv6 Routing Table: 16,000 route entries
• Multicast Group Table: 8,000 multicast group entries
• Shared Hardware Packet Buffer: 16 MB buffer to absorb bursty wireless, video and IoT traffic
• Hardware ACL Scale: 5,120 ingress rules + 5,120 egress ACL rules
• Flexible NetFlow Flow Table: 64,000 flow entries
• Jumbo Frame Support: Up to 9198 bytes
• Maximum Switched Virtual Interfaces (SVIs): 1000 SVIs for inter-VLAN routing

4. Power & Thermal Architecture

• Power Supply Support: 1 or 2 hot-swappable Platinum-efficiency AC power supplies with OIR (Online Insertion and Removal); factory default ships with single 715W AC PSU (PWR-C1-715WAC-P)
• PoE+ Power Budget Scaling:
  Single 715W PSU: 445W total PoE+ power allocation for PoE endpoints
  Dual redundant high-wattage PSUs: Expanded PoE budget to support simultaneous full-power operation of all 24 PoE+ ports
• StackPower Technology: Cross-stack power resource pooling in ring topology, dynamic PoE load balancing and N+1 power redundancy across all stack members
• Cooling System: 3 field-replaceable variable-speed hot-swap fans with redundant cooling design, low acoustic noise suitable for office rack room deployment
• Universal Input Voltage: 100–240V AC, 50/60Hz mains input
• Typical Idle Power Consumption: ~88W under standard operating load

5. Stacking & High Availability Technology

• StackWise-320: 320 Gbps high-speed stacking backplane, sub-50ms traffic convergence upon stack member hardware failure
• SSO/NSF: Stateful Switchover and Nonstop Forwarding to eliminate service interruption during stack supervisor role failover
• Mixed Stack Compatibility: Fully inter-stackable with all Catalyst 9300L series switches (T/P/PF/UXG fixed-port variants); all stack units are managed under one unified logical domain on DNA Center
• Cross-stack EtherChannel, Flexlink+ and Extended Fast Software Upgrade supported to enhance stack-level service resiliency

6. Hardware-Accelerated Baseline Security (Network Essentials Restricted Feature Set)

• MACsec 256-bit AES hardware link encryption supported on all PoE+ copper downlinks and SFP fiber uplink ports
• Trustworthy Systems secure boot, runtime integrity verification and digital firmware authenticity validation via onboard Trust Anchor Module
• Endpoint Authentication Suite: IEEE 802.1X, MAB, basic WebAuth captive portal access control
• Layer 2 Threat Mitigation: Dynamic ARP Inspection (DAI), DHCP Snooping, IP Source Guard, BPDU Guard, broadcast/multicast storm suppression
• Secure Management Transport: SSH, HTTPS, SNMPv3 encrypted communication channels
  Critical License Limitations: Encrypted Traffic Analytics (ETA), TrustSec SGT microsegmentation, SD-Access fabric architecture, containerized application hosting, Cisco Umbrella DNS filtering and ThousandEyes synthetic monitoring are unavailable and require upgrade to Network Advantage (-A) license tier.

7. Layer 2 & Layer 3 Protocol Support

Full Layer 2 Feature Set

Restricted Lightweight Layer 3 Routing Suite (Limited by Essentials License)

8. Software & Cisco DNA Licensing Ecosystem

• Operating System: Cisco IOS XE universal switch image (17.x release train)
• Preinstalled Perpetual License Tier: Cisco DNA Network Essentials
  Core feature coverage includes complete Layer 2 switching, lightweight Layer 3 routing, basic telemetry, zero-touch provisioning, standard QoS and baseline DNA Center integration. It excludes advanced security analytics, fabric segmentation, full dynamic routing and container workload hosting.
• Supported Management Interfaces:
  Local CLI via console/SSH, embedded web UI, Cisco Catalyst Center (DNA Center), Cisco Prime Infrastructure, Zero-Touch Provisioning (ZTP)
• Programmability: Basic NETCONF/YANG streaming telemetry, limited-function on-box Python guest shell; RESTCONF API access is restricted under Essentials license.

9. Physical & Environmental Specifications

• Form Factor: 1 Rack Unit (1RU) standard 19-inch EIA rack-mount chassis
• External Dimensions: 445 mm (W) × 410 mm (D) × 44 mm (H) / 17.5 × 16.1 × 1.73 inches
• Chassis Weight (single 715W PSU installed): 7.1 kg (15.65 lbs)
• Operating Ambient Temperature: 0°C ~ +45°C
• Storage Temperature: -40°C ~ +70°C
• Operating Humidity: 5% – 90% non-condensing
• Typical MTBF Rating: 208,500 hours under standard factory operating conditions
• Compliance Certifications: UL, CSA, CE, FCC Class A, ICES-003, RoHS, TAA, ENERGY STAR certified

10. Model Naming Breakdown

• C9300L: Catalyst 9300 Lite cost-optimized fixed-uplink stackable switching platform equipped with StackWise-320
• 24P: 24-port 10/100/1000BASE-T IEEE 802.3at PoE+ copper downlinks
• 4G: Four fixed Gigabit SFP fiber uplink ports
• E: Pre-activated Cisco DNA Network Essentials perpetual baseline license tier

11. Typical Deployment Scenarios

1. Small & medium enterprise office wired access powering IP phones, entry-level Wi-Fi 5/6 APs and low-power PoE surveillance cameras with Gigabit fiber uplinks to distribution layers
2. Small branch office access layer combining wired workstations and wireless APs with basic inter-VLAN routing demands
3. Education classrooms and training labs equipped with PoE IP cameras, VoIP handsets and wireless access points
4. Light-density smart building IoT aggregation for access control panels, low-power lighting sensors and digital signage
5. Cost-sensitive entry-level PoE access without SD-Access fabric, complex multi-protocol routing or advanced threat analytics requirements

Key Distinction Note

• -E (Network Essentials): On-prem DNA Center managed, baseline perpetual license with limited Layer 3 routing and no advanced security/fabric features, lower upfront procurement cost
• -A (Network Advantage): On-prem DNA Center managed, full-feature perpetual license with ETA analytics, TrustSec segmentation, BGP/EIGRP and SD-Access fabric support
• -M (Meraki Cloud-Managed): Cloud subscription-based orchestration, split Meraki Enterprise/Advanced feature tiers without Cisco DNA perpetual licenses